Rockspace WiFi Range Extender Red Light Issue? Fix It In Minute

The rockspace is a wireless high-speed & signals amplifier range extended network device. It absolutely extended WiFi network coverage. The internet connectivity of this device completely boosts the speed. The network connectivity completely covers up to 1292 sq. ft. The network connectivity thoroughly supports up to 20 network devices. Additionally, the Rockspace WiFi range extender is compatible with all 5 routers. This device delivers powerful 300Mbps on 2.4GHz & 433Mbps on the 5GHz network. This extender device works with dual-band networks like 2.4GHz or 5GHz networks. The Rockspace extender absolutely delivers more help to eliminating the WiFi dead zone & reducing the interrupted network signals. Every networking device like standard router, cable modem, & access point device easily & securely enhances the wireless network connectivity. 

Furthermore, the Rockspace WiFi Range Extender delivers whole home better & stable network coverage without dead zone. The external antenna is built-in on the top panel of the extender device that delivers a high & secure network in every corner of your home. The setup of this device is simple & fast by using the WPS button. However, you can easily perform the setup with re.rockspace.local. This is the official web address of the extender device. 

Why does the Rockspace WiFi Range Extender flashing red light?

The smart indicator light is built-in on the front panel of the range extender device. This LED light is more helpful that delivers the status of the range extender. The signal light with different color means in this distance whether the wifi signal is good or not, when the light is blue means it has the best connected status. You can easily & securely find the location with this LED light. If the LED light status is blue that means the status of the range extender device is very good.

But if the LED light status is red that means the issue is there in this device. You have to verify the issue, otherwise you cannot access the network connectivity. With a red indicator light, you cannot access the high-speed network connectivity. Here are some issues, due to LED light status being red. 

  • Connect more networking device
  • Firmware upgrade issue
  • Faulty cable connection
  • Place extender near heating source

Rockspace WiFi Range Extender Red Light Issue

If the LED light of the extender device is red then you should verify the issue. Because with a red LED light, you cannot access the network connectivity. Here are some resolutions to resolve the red light issue in a quick manner.

Ensure the cable connection

Sometimes, the cable connection is faulty due to the LED light of the extender device flashing red. To resolve the issue, you have to properly verify the connection. If the power cable that you are plugging into the power connector of this device is useless. Then the LED light issue comes. To properly fix the issue, you have to verify the power cable connection. If the power cord is loose plug into the extender then you have to tightly plug into the power connector of the extender device. After that, press the power button of this device & verify the smart indicator LED light status. 

Verify the network device status

Sometimes, if many networking devices are connected to the range extender device then the LED light status is red. If more than 25 devices are connected to the extender device then the network range is slow or LED light status is red. To resolve the issue, you have to verify the network device status. With the default login ip, you can easily reach the setting. In the setting, you have to select the network status option. If many devices are connected then you have to disconnect. To disconnect the device you have to change the repeater password. After that, the extra device accurately disconnects from the extender. 

Examine the extender device location 

Many times, the location of the Rockspace WiFi Range Extender device is incorrect due to the LED light status being red. If the LED light status is red then you have to verify the location. If your range extender device is placed near a heating source or device, this range extender will overheat and the status of the LED light will turn red. To properly resolve the issue, you have to examine the location. The best location of the extender is under the cooling & ventilated area. 

Restart the range extender

To resolve the red LED light issue, you have to restart the range extender device. You can easily & simply restart the extender. To restart the Rockspace WiFi Range Extender, you have to disconnect the connection from the network device. Then, press the power button & quickly restart the range extender device.

Read more – How to Protect Your Devices

One thought on “Rockspace WiFi Range Extender Red Light Issue? Fix It In Minute

Leave a Reply