Read the Professional Tips for Installation of AC Unit

The AC Unit Installation is a major investment, so it’s important to have the process done properly. If you are looking for tips on installing your air conditioner, then read the professional advice below. 

This blog post provides information to help you understand all aspects of installing an air conditioning unit in your home or office. It discusses what should be considered before beginning this project and gives some useful tips on getting started with the installation. So, let’s start!

Step 1: Find the Suitable Place:

The first thing you need to do before starting the installation of the AC is found a suitable place. The air conditioner must receive a supply of sufficient ventilation at all times, whether you are operating it or not.

However, locating an air conditioner in an area that doesn’t have proper ventilation can be hazardous because it could lead to overheating and unnecessary production of toxic fumes, which may cause harm to your health. So, make sure that there should be enough room available for the free flow of fresh air around it whenever you are installing the unit.

Step 2: Buy AC According to Your Needs:

There are many varieties of air conditioners, and you should find out which one is suitable for your home. You may either purchase a window type or split type air conditioner depending on the size and climatic conditions where you live.

There are also other types like floor-standing, ceiling-mounted, etc., but these two would be sufficient enough to meet all your needs. The cost of getting an air conditioner depends on its efficiency, so do not settle for something less than what you need.

Step 3: Site Preparation:

When installing the AC unit, you must select a suitable place and consider whether it can support its weight and size before actually purchasing it. This will ultimately prevent any unnecessary damages that may occur due to any external forces.

Step 4: Prepare the Site for Installation:

Once you have decided where to install it, it is time to clear that area and remove anything that will build up there, like wallpaper or plasterboard. The space should be well-ventilated because this is where the unit will be installed.

After this has been done, use wooden boards or steel beams to make a sturdy base for your unit. Place them carefully so as not to waste any space within the room. Once done, place another layer of steel beams on top of the previous ones with an interval of 2 feet between them in all directions.

The next step would be to remove these boards once again and make a large hole in its center enough for the unit to fit in.

Step 4: Install the Steel Bars:

After this, install the steel bars through the holes and secure them according to what you need. It will be easier if two people do this because it is difficult to balance the weight of these beams on your own. Ensure that one side of these beams can still slide back and forth for when you attach the cooling unit later on.

Once done, measure out a rectangular box into which you will place the unit. The size should not cover more than about three-quarters of its total space, or else it defeats the purpose of having a portable air conditioning system. After cutting out your hole, remove any sharp edges from its sides using sandpaper before proceeding further with the installation.

Step 5: Assemble the AC Components

Now it is time to get the air conditioner from the factory box and put it on your wall. You can do this by sliding one side of it first and then pushing the other end until you feel that the unit has been partially placed onto its spot.

If you can, ask someone to help you. You should push the part into the hole in the wall. There should be room between each part of the system (air conditioner, beams, interior panels). This way air can go through without too much trouble.

Step 6: Provide Electric Supply

First, connect the cords that are inside your machine to the electric socket. This will make your AC work.

Install some shock breakers to stop the electricity from returning to the wires in your system once it passes through electrical cords. Explain to kids what these are and how they work.

Step 7: Provide Air Supply

When the air conditioner is in its place and tight, then open the door of your house’s air supply. This process will suck in some air from outside and let them into your room. Use a hosepipe with an attached vacuum cleaner at one end to do this job easily.

Make sure not to overdo this step. If you do, there might be water leakage or damage throughout your living space. So, make sure the hose pipe blows out clean air (without particles like dust or dirt) after sucking in some fresh air from outside. Once done, turn on all-electric switches (for interior lights) before turning on the AC unit.

Step 8: Inspect Before Use

After these steps, make sure your machine is good. Look inside to make sure there are no loose bolts or screws that can cause it to not work in the future. If you find any broken parts, quickly connect them to the customer service department and contact them.

This inspection will save time and a lot of money in the future. It is better to be safe than sorry! Proper installation, maintained condition, and efficient use of an AC unit can help you save a lot on electricity bills. If you want your AC unit to work 24×7 efficiently, you have to take proper care of it.

Step 9: Turn on the AC Unit

Now, put your electronic remote control to use and turn on the AC machine. Adjust temperatures as per your comfort and enjoy a cool breeze through the day and night (depending upon seasons).

After you have installed an air conditioning machine in a room, do not use it for ten days or one month. Instead, give reasonable time to that room where the new machine is installed.

Final Thoughts:

In this article, I have provided some of the most important tips for your new AC unit. In addition to this, you can also follow advice from a reputed and experienced company like Le High HVAC. They will guide you with proper use and care of your AC unit, giving more effective results.

Enjoy a cool breeze throughout the year!

Leave a Reply